Konica Auto S 1970s'

Bought this vintage off ebay together with another as 'sold as ' and 'don't know it works or not' accompanied with so much free dust all over the lens. A few rather sharp reflected lights off the dusty lens 1:1.9 f/47mm caught my eyes prompting me to take the risk to purchase this. The camera was unexpectedly clean all over after brushing off all the dust and the mechanism is confirmed working perfectly. Quite happy with this purchase with a small outlay for my collection.
The camera is so well built with heavier metal body and the previous owner apparently took good care of this camera.

Zeiss Ikon Contessamat

Another simple classic from the Zeiss Ikon series of 35mm film camera which needs no battery for its perfectly working light meter. This camera was barely used with its rather new strap and case. The shutter is so quiet and barely audible!
Quite happy to keep this one for my collection.

Voigtlander Vito C

This is another nice camera with a simple but bright and big viewfinder especially when after I cleaned them upon purchasing it from Germany. It works perfectly though it was from the 50s'and it is unexpectedly heavy for a simple camera. The Voigtlander name is pure classic with its classic style. Thought I should have one of these just for my collection.

Rollei 35 S Black Body

My black beauty Rollei 35 S of the 70s'! The sonnar lens is supposedly excellent for color but not really for monochrome. Looks solid but make sure we don't get any dings and dents on the easily-dentable soft top cover!

Heck...here my beauty and its smallish lens has also requested for a black collapsible rubber hood shade as if shades is necessary!!

Rollei 35 T

A must-have for me if I am into vintage cameras! This is a smallish fully mechanical Rollei 35 T with a Tessar lens supposedly excellent for monochrome and street photography. Zone focusing with a simple viewfinder enables quick draw and snapping! Snapping and holding this camera is a pleasure! PX625 mercury battery for the light meter but if you don't have it, just use sunny 16 rule for your next spin!

Kodak Retina Ib

A 1950s' Kodak Retina Ib in full working condition with a simple viewfinder which is excellent for zone focusing. It fits my palm nicely though it can be slightly heavy for this size.

Konica C35 FD aka Auto S3.

A superb palm-sized camera with a fast lens of 38mm 1:1.8 suitable for street photography. Apparently this model is relatively scarce.
The camera has been serviced and re-calibrated to take in a commonly found non-mercury LR44 battery.  Here my camera has a orange filter and a monochrome film ready for snapping.

Yashica Lynx 14

Another solid camera in my collection is this 1970s' Yashica Lynx 14 with a fast lens of Yashinon 1:1.4. Holding this camera is a pleasure with the smooth solid metal and quiet shutter mechanism.Has always been protected by its solid leather case, this camera is still going strong with all its mechanism.

Kodak Retina Ib. Micro-surgery on sticky shutter.

Entering the heart of the shutter mechanism of any camera can be intimating especially the first time. Step by step and remembering all the postions of the screws and springs can be invigorating for your brain!

The shutter here is rather sticky caused by some old lubricants and dirt. I have to remove the retarder and timer to view and remove the shutter retainer. Take the opportunity to oil the timer as well later.

Parts piece by piece. They are precision parts and must be carefully handled from here.

There are 3 screws that hold the shutter retainer. One is longer than the rest and make sure the longer one is screwed on the right hand side as shown here. Try switching them and your shutter leaf may not open!

Rolleiflex f3.5.Cleaning viewing/focusing & taking lens.

 The dirty focusing /viewing lens has prompted me to take them out for cleaning. Here I have disassembled the lens for a thorough checking and cleaning.A explosive view of Rolleiflex models & repair manual can be found here too.

 I take out the taking lens for cleaning too.At the same time, I do a routine checking on other parts to clean out all dirt and old grease, if any. Looks ok to me.

 I have to open up the shutter mechanism to do a checking too. If you have opened up one before, they all look the same except for their positioning within the camera. Here, the timer mechanism has been placed not inside the compur system but taken out and placed on the top left corner.

 Here is the timer on the top left corner. Just take it out and clean it with benzene and add a drop of lubricant if it is not working.Test it a few times before assembling it.

The heart of the shutter mechanism! No rust or any dirt and all seems well otherwise I have to disassemble it piece by piece and lubricate them for a smoother operation. The empty slot is meant for the timer mechanism. Check them out in the kodak retina and you can find them. Disassembling this mechanism takes some time and just be cautious with all the small spring that can bounce out!

 What a beautiful solid camera made in Germany and the leatherette is real leather! Here is my Rolleiflex 3.5 ready for my next spin!

Rolleiflex 2.8C 1950s'. Cleaning the viewing/focusing and taking lenses.

 My Rolleiflex 2.8C is in perfect working condition except for some slight web-like growth starts to creep in which I noticed and that is worrying me. I have to remove the old leatherette on the top cover before I can unscrew all the screws.There are all together 8 screws appearing on the top cover. Remove all the 6 screws except those 2 above and below the synchro/flash knob else you have to fix them back later.

Covering my lenses first is a precaution from those sharp objects and screwdrivers! Upon removing the cover, a small B release pin may fall off together with some washers from the 7 screws. Make sure you collect them before proceeding!

 Here you can have the chance to tinker with the smallest screw you ever seen on each side of the viewing lens. Removing them and turn anti-clockwise for your cleaning.If you have done this with the cheaper Seagull from China, tinkering with this rather expensive guy here shouldn't be an issue for you!

 Another screw here! Try getting ready a magnet as a safety net, just in case! The screw is so small that it won't kill you if you happen to swallow it!!

I have to see how serious is the creepy growth in there before deciding whether the wholes have to be cleaned! Looks like it's just on the first and 2nd level lenses and taking the whole lens  out is not necessary at the moment.

 Ah,the infected 1st level lens!

See the growth on it? At some point all lenses attracts fungus or creepy growth!

After cleaning with some mildew-fungus preventive solution, the lens looks clean now.

I take the opportunity to take out the taking lens as well. Both are right-threaded and turning anti-clockwise does it. Open up the Bulb aperture and hold it for a while to clean the lens behind the shutter as well! On my way out, I just have to make sure the positions of the shutter knob, synchro/flash knobs etc are in place before covering it.


 

 

The next stage is to cut out a new leatherette similar to this old one for my dear 50s' Rolleiflex 2.8C from Germany before my next flirting with it!!

Argus C4. Cleaning the viewfinder, adjusting the rangefinder and changing the leatherette!

 This American-made Argus C4 of the 50s' was acquired together with so much dirt and dust all over the camera! The rangefinder and viewfinder was practically now viewable with hand-drwan markings on the focusing knobs!

 The top cover can be opened easily and all the related viewfinder and rangefinder lenses cleaned. The loose rangefinder knob is now adjusted and coupled with the focusing ring of the lens. I took the opportunity to dust off all dirt from the mechanism and related parts. Luckily the shutter meachanism is working perfectly else the whole camera must be stripped for lubrication and adjustment. You can imagine how much dirt a classic camera can accumulate over these years in the attic!

 The old leatherette was removed and this classic is now blessed with a new croc-type leatherette! All the related aluminium or metals has been brushed in sync with the new leatherette!

Finally, my Argus C4 is now ready for action. Holding this classic really feeles good in my hands while focusing with the rangefinder is pretty smooth now.Handsome eh!

Argus C3. Cleaning the viewfinder, rangefinder, lubricates and changing a new leatherette.

 This 1950s' Argus C3 is an interesting and sturdy camera to tinker with. Remove the old leatherette and unscrew some of the screws, you can easily access the viewfinder and rangefinder. I cover the exposed shutter blades with tapes before I worked on the rest. The mechanism is simple and cleaning it has been a breeze!
Adjusting the rangefinder is simply adjusting the 2 screws on the top cover and of course you can adjust them later if you prefer.

Here, I decided to change a new leatherette since the old leatherette is getting hardened and too brittle. I have to scrap off all the old remnants properly before covering it with a new skin!

 My American Argus C3 of the 50s' with a crocodile-type leatherette! The viewfinder and rangefinder is ridiculously clear while the rangefinder knobs is smooth as silk! They don't make these kind of classic cameras anymore!!

 

Another one has the opportunity to wear something brown and classic! I can change to any type of leatherette I want as long as they are of the same thickness, durable and ready for constant handling! 

Yashica Mat 124-G. Cleaning the viewing/focusing lens

 Removing the cover of this Yashica mat 124-G is fairly easy with just a few screws.

 The viewing lens is slotted here and tightened by a black screws. Slowly unscrew this and the viewing lens can be removed easily. Just before removing this lens,I just have to remember the position or rather the height of this lens so that it won't affect my viewing later.

 The lens here seems to have some in-grown dirt and what-not for my cleaning and usually I couldn't stand any dirt that may block my view!

 This lens is particularly tightened and I have to use whatever means to open it. It's too risky using some pliers to unscrew it. Here I prefer to use 2 rubber bands to have a better grip and friction to open the lens.

 Finally, I managed to open the lens for my pleasurable cleaning! There are 3 lenses inside the viewing lens and make sure they are placed exactly the same as they should be.

Dirty lens in my hands before cleaning it.Taken against a black background is easy for viewing the dirt here.







 On my way out, I have to make sure the aperture and speed connects properly to the main cover before glueing the leatherette back in place.

 Now this vintage looks decent for my next spin with 120 films. All looks goods and working and not necessary to tinker with the rest unless it is not clicking as it should be.